Water flow sensor is mainly consists of plastic valve body, rotor assembly and Hall Current Sensor.It is installed in the hot water inlet end for detecting water flow. When water through the flow rotor assembly, Magnetic rotor will rotate and Speed will change as the flow change. Hall Current sensor output corresponding pulse Signal and feedback to controller, then the controller will control the flow. Can use for Water heaters, credit card machines, water vending machine, flow measurement device. Features: - Lght weight, small size, easy to install.
- Inlaid with stainless steel impeller shaft, durable wearable.
- Seal Ring with the upper and lower force structure never leaks.
Precautions: - Non-violent shock, and chemical erosion.
- Non-throwing or hitting.
- Mounted vertically, should not exceed 5 degrees inclination.
- Temperature of Medium should not exceed 120 ℃
Cord Connection: - Red: Positive(+)
- Yellow: Signal output.
- Black: Negative(-)
Specification: - Fits for connecting 6.35mm outer diameter PE pipe
- Working voltage range: DC 3.5~12 v
- Working current range: 0.5-1.5mA
- Work temperature: 1- 100 ℃
- Allowing pressure: ≤ 0.8Mpa
- Electric strength: >600VAC
- Insulation resistance: >100 mΩ
- Storage temperature: -40~+100 ° C
- Flow Range :0.3-10L / min
- Size (L x W x H): Approx. 6 x 4 x 2.5cm / 2.36 x 1.57 x 0.98 inch
- Cable length: Approx. 15cm / 5.9 inch
- Color: White
- Material: plastic
I am sure it the right thing you need now. Don't hesitate, bid now and never miss it. You will receive a parcel contains as below. - 1 x 0.3-10L / min Water flow Sensor
|