VICON V1411A USPP V1411A Matrix Switcher system with telementary control
• Telemetry control over Vicoax II (coaxial cable) or
NOVA/Pilot (twisted pair)
• 8 × 2 or 16 × 4 video configurations
• 8 or 16 local alarm inputs with global alarm output
• 8 or 16 receiver alarm inputs via the telemetry
• Compact size for easy installation
• Control via V1411X-DVC keypad with variable
speed
The V1411A video switcher has been designed to work
with the V1411X-DVC, V1400X-DVC or V1300X-DVC/RVC
keypads to switch either 8 video inputs to two monitor outputs
or, with the V1411A-EXP expander module installed,
16 video inputs to four monitor outputs.
Additionally, each video input can transmit telemetry
commands to a SurveyorVFT camera dome, providing
fully functional control of all dome features, including variable
speed, tours and presets, and to Vicon receivers
(V1311RB and V1305R-DC).
The primary telemetry system employed is over the coaxial
cable (Vicoax II, enhanced), eliminating the need to
run additional cables to the dome. The V1411A also offers
twisted pair telemetry transmission for those situations
where coaxial telemetry is inappropriate. Both coaxial
cable and twisted pair telemetry are standard features of
the V1411A and a combination of both can be used on
the same installation for total flexibility.
Up to four operator keypads,V1411X-DVC, V1400X-DVC
or V1300X-DVC/RVC, can be connected to the V1411A
via an RJ-45 RS-422 port on the unit. A second RJ-45
port provides duplex communications to Vicon’s range of
NOVA/Pilot telemetry receivers, plus SurveyorVFT camera
domes. The keypad or receiver data can be wired in
either a star or daisy chain configuration. A V1400X-IDL
(DL or IDL) is required for star configuration.
The V1411A has 8 looping inputs (16 with V1411A-EXP)
that can be looped to a multiplexer or VCR. The monitor
output can be connected to a VCR and the VCR output
fed back in as camera input. There is an alarm output relay
contact to trigger an alarm on a VCR (or other device).
Each video channel has a hardwired alarm input to automatically
display the video picture from the associated
camera onto monitor number 1 in the event of an alarm.
Alarms can also be received via the telemetry path with the
same effect. Both manual and automatic alarm acknowledgement
is supported.
The V1411A is constructed to allow installation on a desktop,
in an equipment rack or fixed to a wall. The V1411A
is equipped with a power supply for 120 VAC, 60 Hz or
for 230 VAC, 50 Hz input. The fuse tray must be inserted
correctly to select input voltage.
The V1411A complies with FCC requirements for a Class
A device and with European Community EMC Directive
89/336 EEC and amendments 92/31/EEC.
BOX IS TATTY BUT PRODUCT IS NEW UNUSED.