Usa-auto-plus
Your best choice
COMPATIBILITY
It is a perfect replacement for Paramount 6-Port Module Water Valve. Package includes a 6 Port Module Water Valve (PN: 004-302-4408-00, 004302440800, 4-009-3189, 40093189, 4-9-3189 or 400093189, 004-009-3189) and a Valve Shell O-Ring (PN: 005-302-0100-00). It is fit for the following systems: PCC 2000, Pool Valet, PV3, Cyclean, Vanquish, Paddock PCC 2000, Andrews Advantage PCC2000 and Vantage In-Floor Cleaning Systems.
FUNCTION
Located in between the top dome and the base of the water valve, the 004-302-4408-00 6 Port Module is what helps distribute water to the nozzles throughout your pool, improving the circulation. Module houses the cam plate and gear assembly. Requires no electricity to operate and works automatically when the pump is running, lowering the heating costs. It helps to the chemical costs and electrical consumption.
EASY INSTALLATION
First take off the band clamp and lift off the dome cover. Pull straight up on the old 6-port module to remove it from the base unit. And then install the new O-ring, making sure the channel is clean and free of debris. Put the new module into the base, rotating if necessary to align and seat it properly. Re-place the dome and the band clamp.
MATERIAL
The 6-Port Module is made of high-quality plastic, rubber, steel and copper. With strong durability, corrosion resistance and anti-rust performance. Better quality allows it to be used for a longer time.
100% SATISFACTION GUARANTEE
We are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day full refund on return and a 12-month warranty.
Module Inspection
NOTE: The module is designed to seal inside the base so it may require a side to side or rocking motion while lifting out. An easy solution is to turn the pump on and off quickly. Do not pull the module by the gear mechanism. This can result in damage to the module.
1. Check the O-Ring and groove for debris, and clean if necessary (this is a quad ring and is almost square, the height is slightly bigger than the width).
2. Replace the O-Ring (Part# 005302010000) if it is stretched or damaged. The O-Ring does not require any lubrication. Lubricating O-Ring can attract dirt and debris that could prevent it from sealing. Never use petroleum jelly on plastic or rubber parts, as this will damage them.
3. Set the module in the base and turn until the alignment pins on the bottom of the module drop into the alignment holes in the base (Fig. A).
4. The module should fit in the base without forcing it. If it does not seat easily then check the following.
(Fig.A) shows the piston portion of the current module design (Released 06-2011). These pistons are set at the factory. Do not touch, pull or turn these pistons. Any handling will negatively affect the performance and fit of this product.
If the flow optimizer (Fig. B) prevents the module from seating properly in the base you may have to remove it. To remove optimizer press in on the 3 clips and pull to separate.
Item Specifics | |
---|---|
Type | 6 Port Gear Module |
EAN | Non applicable |
Marque | UAP-Auto |
Marque compatible | For Paramount |
Numéro de pièce fabricant | 004-302-4408-00 |
Caractéristiques | Durable, Corrosion resistant, Rust resistant, Electricity free |
Garantie fabricant | 1 an |
1. Payment methods accepted: Payonner . Allows to pay by credit card, debit card and your paypal balance.
2. Payment must be received immediately.
3. We ship items to Your Ebay address .Please make sure your Ebay address is correct before you pay,cause it cannot be changed once the order shipped out.
1. Item will be shipped within 1 business day after your payment cleared.
2. Item will be shipped by SpeedPak or other shipping method .
3. Delivery time depends on destination and other factors,please feel free to contact us by email if you cannot get your order in time.
Please read the shipment and payment detail carefully before you place the order .
Returns1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.
Our office hours is as below :
Usa-auto-plus
Your best choice
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Store Home
Other Hot Item
|
For Paramount Water Valve 6 Port Gear Module 004-302-4408-00 with O-Ring Seal
COMPATIBILITY
It is a perfect replacement for Paramount 6-Port Module Water Valve. Package includes a 6 Port Module Water Valve (PN: 004-302-4408-00, 004302440800, 4-009-3189, 40093189, 4-9-3189 or 400093189, 004-009-3189) and a Valve Shell O-Ring (PN: 005-302-0100-00). It is fit for the following systems: PCC 2000, Pool Valet, PV3, Cyclean, Vanquish, Paddock PCC 2000, Andrews Advantage PCC2000 and Vantage In-Floor Cleaning Systems.
FUNCTION
Located in between the top dome and the base of the water valve, the 004-302-4408-00 6 Port Module is what helps distribute water to the nozzles throughout your pool, improving the circulation. Module houses the cam plate and gear assembly. Requires no electricity to operate and works automatically when the pump is running, lowering the heating costs. It helps to the chemical costs and electrical consumption.
EASY INSTALLATION
First take off the band clamp and lift off the dome cover. Pull straight up on the old 6-port module to remove it from the base unit. And then install the new O-ring, making sure the channel is clean and free of debris. Put the new module into the base, rotating if necessary to align and seat it properly. Re-place the dome and the band clamp.
MATERIAL
The 6-Port Module is made of high-quality plastic, rubber, steel and copper. With strong durability, corrosion resistance and anti-rust performance. Better quality allows it to be used for a longer time.
100% SATISFACTION GUARANTEE
We are committed to providing excellent products and the best service for our customers. If you are not satisfied with the product, you can simply return it. We support a 30-day full refund on return and a 12-month warranty.
Module Inspection
NOTE: The module is designed to seal inside the base so it may require a side to side or rocking motion while lifting out. An easy solution is to turn the pump on and off quickly. Do not pull the module by the gear mechanism. This can result in damage to the module.
1. Check the O-Ring and groove for debris, and clean if necessary (this is a quad ring and is almost square, the height is slightly bigger than the width).
2. Replace the O-Ring (Part# 005302010000) if it is stretched or damaged. The O-Ring does not require any lubrication. Lubricating O-Ring can attract dirt and debris that could prevent it from sealing. Never use petroleum jelly on plastic or rubber parts, as this will damage them.
3. Set the module in the base and turn until the alignment pins on the bottom of the module drop into the alignment holes in the base (Fig. A).
4. The module should fit in the base without forcing it. If it does not seat easily then check the following.
(Fig.A) shows the piston portion of the current module design (Released 06-2011). These pistons are set at the factory. Do not touch, pull or turn these pistons. Any handling will negatively affect the performance and fit of this product.
If the flow optimizer (Fig. B) prevents the module from seating properly in the base you may have to remove it. To remove optimizer press in on the 3 clips and pull to separate.
1. Payment methods accepted: Payonner . Allows to pay by credit card, debit card and your paypal balance.
1. Item will be shipped within 1 business day after your payment cleared.
Please read the shipment and payment detail carefully before you place the order . Returns1. Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice). Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding. - 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday And our office is closed on Sunday and public holidays (Hong Kong) We apologize for the late reply during the holidays.Please contact us via ebay using"Contact member". We will respond within 1 business day or less. Please include your ebay item numberor order number in all communications. All rights reserved. |