Pro-Max Bench Grinder Metal Polishing Right Hand Spindle Adapter 12.7mm - 1/2"

Vendu Voir des articles similaires EUR 12,14 Achat immédiat, EUR 9,51 Livraison, 30-Jour Retours, Garantie client eBay
Vendeur: metalpolishingsuppliesuk ✉️ (58.220) 100%, Lieu où se trouve: Welshpool, GB, Lieu de livraison: GB et de nombreux autres pays, Numéro de l'objet: 281773324196 Pro-Max Bench Grinder Metal Polishing Right Hand Spindle Adapter 12.7mm - 1/2".

Pro-Max Bench Grinder Metal Polishing Right Hand Spindle Adapter 12.7mm - 1/2"
Description

Pro-Max Bench Grinder Metal Polishing Right Hand Spindle Adapter 12.7mm - 1/2"

This great quality Pro-Max 1/2" 12.7mm right hand bench grinder metal polishing spindle adapter converts your 6" bench grinder into a metal polishing machine and is used for attaching metal polishing and buffing wheels up to 6" diameter (150mm). This right hand spindle adapter comes in two sections and now incorporates a tapered mandrel which you can use to attach polishing buffing wheels to a drill.

Fitting instructions are included.

IMPORTANT: Please check the shaft diameter of your machine before you place your order.

Adapter Specifications:

Internal bore - 12.7mm or 1/2"

Total length - 125mm

Length of taper - 55mm

Diameter of body - 20mm

Taper - 5mm - 20mm

Please Note: From the front position (the position you operate the machine from) the adapter fits on the right hand side.

Shipping Returns Order Cut Off Times Metal Polishing Guide Product Guide

OUR DELIVERY PROMISE:

Honesty is the best policy when it comes to a delivery promise. We monitor our carriers on a regular basis and believe we use the best companies in the industry to care for and deliver your goods.

As the majority of our consignments are delivered via external couriers we cannot guarantee 100% that your goods will arrive with you on the day we state. On a running average we have found that over 95% arrive on the expected date the other 5% are susceptible to conditions outside of our command.

If your goods have not arrived on the day we state then it is more than likely they follow on the next day but please feel free to contact us through eBay.

Please Note: We currently do not deliver on Saturdays, Sundays or Public Holidays.

We hope you will love your purchase, however if you need to return it, we have a 30 day return policy.

ORDER CUT OFF TIMES:

Orders received and paid for in full by 12.00pm Monday to Friday, excluding Public Holidays, are usually dispatched the same day (subject to force majeure), orders placed after this time will be dispatched the next working day. 

Please Note: We currently do not deliver on Saturdays, Sundays or Public Holidays.

What is Metal Polishing?

 

Metal Polishing sometimes known as finishing or buffing is the process of removing scratches and abrasions from a surface, and creating the desired brightness of finish on that surface. Polishing, like using sand paper, consists of procedures each of which is less abrasive than the previous. A combination of polishing and buffing wheels (mops) and compounds are used with a buffing machine or a household electric drill (pneumatic tools may also be used but only at relatively low speeds of 3000 - 4000 rpm max.)  

Metal polishing is the particular combination of metal polishing buffing wheels and metal polishing compounds which gives the desired cut and colouring action

Important: Please remember to clean and de-grease the item you wish to polish. Unclean / dirty / greasy material should be prepared properly before being polished. Deep scratches need to be sanded out with suitable abrasives e.g. wet and dry paper, sanding mops etc. before the polishing process.

 

    

Step By Step Guide To Metal Polishing

For Polishing Soft Precious Metals Or Chrome Please Start At Step Number 7 On The Guide Below.

1. Attach the tapered mandrel to your drill, or bench grinder / angle grinder spindle adaptor to your machine and fix tightly. 

2. Attach the Sisal polishing wheel onto the mandrel / adaptor and screw on tightly.  

3. Run the machine and apply the relevant polishing compound to the sisal polishing wheel for approximately 2 seconds. The metal polishing compound is wax and abrasive based so the motion of the spinning polishing wheel generates heat which melts the wax and abrasive onto the polishing buffing wheel.  

4. Apply the polishing buffing wheel or present the the item to be polished with medium pressure. It is very important that you remove all marks and scratches and leave a uniform finish. 

5. Apply more polishing compound to the Sisal polishing buffing wheel when required.  

6. When all scratches and marks are removed and the work piece has a uniform dull finish, remove the Sisal polishing wheel. 

7. Attach the Colour Stitch or White Stitch polishing buffing wheel onto the mandrel or adaptor and screw on tightly.  

8. Run the machine and apply the relevant polishing compound to the polishing buffing wheel for approximately 2 seconds. 

9. Apply the polishing buffing wheel or present the the item to be polished with soft to medium pressure, this will remove the dull finish left by the first process and leave the work piece with a semi-bright finish. 

10. Apply more polishing compound to the polishing buffing wheel when required.

11. When you have a uniform semi-bright finish, remove the Colour Stitch or White stitch polishing buffing wheel. 

12. Attach the ‘G’ Loose Fold or Swansdown WDR buffing wheel onto the mandrel or adaptor and screw on tightly.  

13. Run the machine and apply the relevant polishing compound to the buffing wheel for approximately 2 seconds.

14. Apply the polishing buffing wheel or present the the item to be polished with soft to medium pressure. This will remove the semi bright finish left by the second process and leave the work piece with a bright finish. 

15. Apply more polishing compound to the buffing wheel when required.

16. You should now be left with a bright finish.

  

17. Rub the polished article with a good metal polish like PEEK and a dry soft micro fibre cloth. This will remove any excess polishing compound and grease left on the surface. 

 

Metal Polishing Top Tips

  • Try to constantly vary the directions of which you polish. This is not always possible but recommended as some articles may be an unsuitable size and shape.

  • Use the polishing compound sparingly, black grease marks will appear on work piece if too much polishing compound has been applied to the polishing buffing wheel.

  • Remove black grease marks with Vienna Lime and a dry soft micro fibre cloth.

  • Remember: apply polishing compound little and often. 
  • If it is possible, polish across marks / scratches - not along them. 

  • If the surface of the work piece is lacquered you must remove the lacquer before polishing, use a household paint remover available from your local DIY store. 

  • Remember to wear appropriate safety gear.

  • Use a different polishing buffing wheel for each colour of polishing compound.

  • If you need to use a different polishing compound on the same polishing buffing wheel, or just to clean the wheel, you can apply a wire brush or a blunt knife against the rotating wheel to clear the compound residue.

  • Do not mix different polishing compounds on the same polishing buffing wheel.

  • If you are polishing small articles then you can fix your drill into a vice, this will enable you to polish these small articles with ease.

  • Sometimes when you have polished a surface you may see a slight coat of grease or finger marks on the work piece - these can be removed with Vienna Lime powder. Just rub the powder onto the work piece with a dry soft micro fibre cloth.

  • Protect polished articles with a good wax polish.

  • If you wish to electroplate or lacquer the polished article, please make sure you use a good de-greaser and do not protect with wax polish. Any dirt or grease / wax will interfere with the adhesion of the plated metal or lacquer. 

 

Health & Safety

Always Use Safety Equipment - Dust Mask, Safety Spectacles And Gloves Should Be Worn At All Times.  

Always Apply The Item Being Finished To The Area Of The Mop Which Is Rotating Away From Yourself.

Our Polishing Products

Below is our range of great quality Pro-Max metal polishing products and tooling with a brief description on what and how they are used. Each of our metal polishing kits come with a polishing guide to help guide you through the polishing process. 

Pro-Max Metal Polishing Mops And Buffing Wheels

Pro-Max Sisal Metal Polishing Buffing Wheels

These are very fast cutting and hard, they are particularly useful for first stage polishing operations with Pro-Max Brown Metal Polishing Compound on soft metals including Aluminium, Alloys, Brass and Copper, and Pro-Max Black Metal Polishing Compound on hard metals including Steel and Stainless Steel.  

 

 

Pro-Max Colour Stitch Metal Polishing Buffing Wheel

These are versatile cutting polishing buffing wheels used for general metal polishing which can be used for first or main stage polishing with Pro-Max Brown or Pink Metal Polishing Compound on soft metals including Aluminium, Alloys, Brass, Chrome and Copper, or for second stage polishing with Pro-Max Green or White Metal Polishing Compound on hard metals including Steel and Stainless Steel. 

 

 

Pro-Max ‘G’ Loose Fold Metal Polishing Buffing Wheel

The most popular type of finishing polishing buffing wheel. These metal polishing buffing wheels can be used with Pro-Max Blue, Green, Pink and White metal polishing compounds on all metals including Aluminium, Alloys, Brass, Chrome, Copper, Steel and Stainless Steel. 'G' Loose Fold Metal Polishing Buffing Wheels are made from 100% white soft cotton, with no hard pieces. 

 

 

Pro-Max White Stitch Metal Polishing Buffing Wheel

These are made from high grade cotton and are the most popular grade of Jewellery Polishing Mops used for general polishing operations on jewellery. They are specifically designed for polishing all precious metals like Gold, Silver & Platinum with Pro-Max Brown or Jewellers Rouge Metal Polishing Compound. 

 

 Pro-Max Swansdown WDR Metal Polishing Buffing Wheel

 These are very soft and versatile, made from high grade cotton, and are the most popular grade of finishing polishing wheels for jewellery which are used for final high finishing polishing

 operations. They are specifically designed for polishing all precious metals like Gold, Silver & Platinum with Pro-Max Jewellers Rouge metal polishing compound. 

 

Pro-Max Metal Polishing Compounds

 Pro-Max Brown Metal Polishing Compound - for first or main cut and flattening on Non-Ferrous (soft) metals.

Pro-Max Blue Metal Polishing Compound - for final buffing and finishing on Non-Ferrous (soft) metals.

  

Pro-Max Black Metal Polishing Compound - for first cut and flattening on Steel and Stainless Steel.  

Pro-Max Green Metal Polishing Compound - for final buffing and finishing on Steel. 

Pro-Max White Metal Polishing Compound - for final high polish finishing on Stainless Steel.  

Pro-Max Pink - for main and final high polish finishing on Chrome. 

Pro-Max Jewellers Rouge - for polishing soft Precious Metals such as Gold, Silver and Platinum.  

Pro-Max metal polishing compounds are wax based with varying amounts of aluminium, iron and chromium oxide, plant lipids, and and are not toxic. We do not have the exact ingredients as these are trade secrets and the proprietary rights belong to the manufacturing company.

Pro-Max Metal Polishing Machine Adaptors And Tooling

Tapered Mandrels - These are used to attach polishing mops and buffing wheels to a standard drill

 

Bench Grinder Spindle Adaptors - These are used to attach polishing mops and buffing wheels to bench grinders, they come in two standard bore sizes - 1/2" or 12.7mm and 5/8" or 16mm and fit directly onto the main shaft of the bench grinder.

 

Angle Grinder / Car Sander Polisher Adaptors - These are used to attach polishing mops and buffing wheels to Angle Grinders and Car Sander Polishers, they have a M14 internal thread that screw directly onto the machine.

Powerful eBay listing templates by 3Dsellers

  • Condition: Neuf
  • Brand: Pro-Max
  • Intended Use: Modification/ Enhancement
  • MPN: SAIM-RH12
  • EAN: 5060268370203
  • UPC: 5060268370203
  • Weight: 190
  • Country/Region of Manufacture: China

PicClick Insights - Pro-Max Bench Grinder Metal Polishing Right Hand Spindle Adapter 12.7mm - 1/2" PicClick Exclusif

  •  Popularité - 105 personnes suivent la vente, 0.1 de nouvelles personnes suivent la vente par jour, 2.073 days for sale on eBay. Super grande quantité suivi. 413 vendu, 5 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 58.220+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif