machine colle chaude thermofusible ITW Quattro dinatechot-melts
compatible avec les tuyaux et applicateur NORDSON models 2300, 3100, 3400, 3500 Nordson ® and generators ProBlue ®.
sort de révision .
refurbished by manufacturer , International Buyers please contact us for shipping prices and quotes
Fonctionnalités :
ITW Challenger ® generator Quattro Melter is a generator designed according to metrics and controlled electronically. The control panel is controlled by touch sensitive icons and friendly international. The generator uses a Quattro temperature control by microprocessor for controlling the temperature as close to the hot-melt adhesive in the tank and up to four pipes and four heads. The operator selects the setpoint temperature for up to nine heating zones. In addition, the system automatically distributes alerts in case of operator error and fault systems.
ASU uses a piston pump with constant pressure, extremely reliable. The pneumatic pump ensures a high pressure outlet of the adhesive from an inlet of low pressure compressed air.
* Note: Nordson ® is a trademark of Nordson Corporation. St ProBlue ® a trademark of Nordson Corporation.
Capacité générateur |
8,5kg (18.7lbs) |
Température de fonctionnement |
40°C-218°C (100°F-425°F) |
Capacité de fusion (par heure)* |
9,1 kg/h (20 lb/hr) |
Débit pompe |
0,87 kg/min (1.92 lb/min) |
Taux de compression pompe à piston |
14:1 |
Zones de sortie tuyaux |
4 |
Pression hydraulique de fonctionnement maximale |
9,7 MPa (1400psi) - pompe à piston |
Tolérance de .régulation de température |
±1°C (±1°F) |
Installation électrique |
200-240 VAC 1-3ph 50/60 Hz |
Installation électrique |
380 VAC 3Phase 50/60 Hz |
Viscosité de fonctionnement |
500-30 000 cps |