PM50 signes vitaux moniteur patient spo2 nibp fréquence cardiaque nibp dynamique

PM50 patient monitor
               

Introduction

 

PM50 is a multi-functional patient monitor that can monitor BP and SpO2 at  the same time. Realizing long time monitoring of dynamic blood pressure, the device is widely applicable to hospital wards, community clinics  and other medical institutions.

 

Functions

 

Features:

1)Compact and portable, easy to use.

2)With Integrative SpO2 Probe.

3)Double working modes,monitoring function and 24 hours ambulatory NIBP measurement function can be flexibly set.

4)Long time monitoring BP and SpO2, displaying value of BP, SpO2 and PR.

5)NIBP and SpO2 data Record for large capacity.

6)With friendly user interface, the user can see list menu and review measurement results.

7)The device can display low power information, alarm information, error information and time information richly.

8)Parameter alarms function is optional.

9)Patient information can be flexibly set.

10)Case management function.PC software can achieve data review, analysis  measurement results, seeing trend, printing reports and other functions.

11)Data can be transmitted between device and computer, such as upload patient information, download measurement data.

12)English and Chinese menu.

 

Function of master device software:

1）Set patient information through PC software.

2）Up to 1000 patients cases can be edited and supervised.

3）The time segment of dealing with the patient’s NIBP data is 48 hours.

4）Connect the device by USB interface.

5）Can upload patient information data collection project and download collection data.

6）Can display scoop-shape trend graph,filling-type trend graph, histogram, pie chart, correlation line graph.

7）Can edit every piece of data, and add annotation to it.

8）Can edit basic information,doctor's advice information, NIBP and SpO2  status instruction, current medicine-taken information, etc.

9）Support print preview,print the report.

 

Performance

NIBP：

• Measurement Method: Oscillometry
• Measurement Mode: The upper arm measure
• Measuring range: 
•        SYS   40mmHg～270mmHg
•        MAP  20mmHg～235mmHg
•        DIA   10mmHg～215mmHg
• Automatic Measurement Interval: 5.10.15.20.30.45.60.90.120 minutes
• Resolution: 1mmHg
• Accuracy: ±3mmHg
• Increasing pressure mode: force pump increases pressure automatically
• Reducing pressure mode: self-motion ladder reducing pressure mode
• Alarm parameter: SYS / DIA

SpO2:       

• Measuring range: 0%～100%
• Resolution:1%
• Accuracy: 70-100%, ±2%, below 70% unspecified
• Error in Weak Filling Condition:SpO2 and pulse rate can be shown correctly  when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
• Resistance to surrounding light:The deviation between the value measured in the  condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
• Pulse Rate:    
• Measuring range:30bpm~250bpm
• Resolution:1bpm
• Accuracy: ±2 bpm or ±2% (select larger) 

Display: 

• 2.4" TFT colour LCD
• Safety:
• Power: DC 3V（Two "AA",1.5V Alkali Battery）< /div>
• Product safety type:Type BF application part (Internally powered,defibrillator protected)

 

Accessories

• cuff for adult
• Integrative SpO2 Probe
• USB data line
•  PC software to be downlaod from the website
• Pouch
• User manual

 

Physical characteristic

• Dimension: 128*69*36 mm (No including Packing)
• Weight: <350g (Including Batteries)
• Working environment:
• Temperature：5 ˚C～40 ˚C
• Relative humidity：≤80%
• Altitude：-500 to 4,600m (-1,600 to 15,000ft)
• Specific EMC, climate, mechanical environment: Do not use a mobile phone in the  vicinity of the patient monitor for the strong radiation field produced  by  mobile phone would interfere with the normal function of the patient monitor use.
• Storage environment:
• Temperature： -20˚C ~ 60 ˚C
• Relative humidity： ≤95 %
• Altitude：-500 to 13,100m (-1,600 to 43,000ft)
• Specific EMC, climate, mechanical environment: The patient monitor after  packaged should be stored in a well-ventilated room with no corrosive  gas. Strong shock, vibration and snow and rain should be avoided during  transportation.

Buy safe products
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG)with the code 197923, and certified by FDA of United States and CE,TUV of Europe. The  Fingertip Pulse Oximeter that is FDA 510K Approved
About Us
Contec Medical Systems focusing on research, manufacture and distribution of medical instruments,was founded in 1992 as a high-tech company.At present there are more than 1200 employees in our company.Our product line covers a wide range of 13 categories.Most of the domestic hospitals are our customers.Contec hopes to cooperate with international companies to supply more innovative design and advanced technology products We sincerely welcome you to become one of our global partners.We are looking forward to establishing a successful business relationship with you.

Shipping
1.Our shipping rates include the cost of shipping, handling, packaging,custom fees are not included,buyers pay the taxes.
2.We usually shipped out the items the next business day after payment has been verified (Sat. & Sun. excluded.)

Contact Us
Please contact us first if you are not satisfied with the item when you receive it or haven't received item after 30 days, We will try our best to solve any problem. Open case and negative feedback is not conducive to solve the problem for both sides. hope you can understand!
All emails will be answered within 24 hours on weekdays(but within 48hours on weekends).Please don't hesitate to contact us with any queries or comments about our items or your problem.
Only English operating instruction,if you need any other language,please contact us!

                                                                               
Only English User Manual,Please contact us if you need other language version.thank you

• Condition: Neuf
• Marque: CONTEC
• MPN: 69450401
• Monitor Parameters: Array
• Features: Array
• Model: PM50
• Country/Region of Manufacture: China
• Warranty: 2 Years
• Certification: FDA CE

Voir Plus