3-AXIS SHOCK & vibration smart probe
Properties
3 axis accelerometer
DC to 250 Hz useful bandwidth
Low noise
Compact and rugged design
Protection grade IP67
PosSIBLE USE
“Quick & dirty” vibration monitoring
Real-time vibration analysis
Real-time frequency and time analysis
Vibration diagnosis
Vibration modal analysis
Machine tools - Automotive - Aviation
Structural analysis and Health Monitoring
benefits
RECOVIB Feel has been designed for performing an immediate vibratory analysis. It is connected to an Android device or tablet PC via a USB connection. The supplied application enables the streaming of real-time vibration data on a chart in the time domain and in the frequency domain.
While streaming, it is possible to record vibration data in order to replay it in a data viewer, on your smartphone or your PC. The viewer allows for a detailed analysis of the vibrations recorded in the time domain and in the frequency domain.
Various signal processing options are available: high-pass, low-pass and band-pass filters, integrator filters (velocity mode) and dual-integrator filters (displacement mode).
In the frequency domain, several FFT-based computations are offered : Amplitude Spectrum Peak and RMS, Power Spectrum, Power Spectral Density and Amplitude Spectral Density.
CERTIFICATIONS
|
STANDARD |
STANDARD REFERENCE |
LIMIT LEVEL |
EMC COMPLIANCE |
Radiated Emission |
EN 55016-2-3/CISPR 16-2-3 |
EN/IEC 61000-6-3 30MHz-1GHz |
Electrostatic discharge immunity |
EN/IEC 61000-4-2 |
4kV by contact 2,4 & 8kV in air Criterion B | |
Magnetic Field Immunity |
EN/IEC 61000-4-8 |
30 A/m 50 & 60 Hz Criterion A | |
Radiated, radio-frequency, electromagnetic field immunity |
EN/IEC 61000-4-3 |
80 MHz – 1GHz 10V/m 1.4-2.0 GHz 3 V/m 2.0-2,7GHz 1V/m AM 80% 1kHZ Criterion A | |
DUST & WATER INGRESS PROTECTION LEVEL |
Degree of Protection provided by enclosures (IP code) |
IEC60529 |
IP67 |
specifications
Measurement characteristics |
Model |
± 2g or ± 6g |
± 15g |
Lower frequency limit |
0Hz (DC) | ||
Passband frequencies x, y, z axes (-3dB) |
250 Hz | ||
Output unit |
m/s2 - g | ||
Streaming rates (per channel) |
1024 samples per second | ||
Non-linearity |
± 0,5 % F.S. |
± 0,3 % F.S. | |
Residual noise density |
30 μg / √ Hz |
300 μg / √ Hz | |
Residual noise (250Hz bandwidth) |
475 μg |
4.75 mg | |
Transverse sensitivity |
± 2% | ||
Sensor technology |
MEMS | ||
Environmental characteristics |
Operating temperature range |
-10 .. 50°C | |
Temperature coefficient of sensitivity |
± 0.01 %/°C |
± 0.01 %/°C | |
Temperature drift of zero point |
± 0.4 mg/°C |
± 1 mg/°C | |
Protection grade |
IP67 | ||
Mechanical Data |
Dimension |
46.8 x 30 x 23 mm | |
Weight |
45.3 g | ||
Case Material |
Aluminium | ||
Autonomy |
Average Power Consumption (idle) |
39.15 mW | |
Average Power Consumption (streaming) |
57.35 mW | ||
Software |
Output format |
Binary |
requirements
Android
MINIMUM CONFIGURATION |
RECOMMENDED CONFIGURATION |
Minimum SDK Version : Android 4.4 (Kitkat) – API Level 19 |
Target SDK Version : Androidi 7.0 (Nougat) – API Level 24 |
RAM Memory : 2GB |
RAM Memory : 4GB or more |
USB OTG – USB Host |
USB OTG – USB Host |
Windows
MINIMUM CONFIGURATION |
RECOMMENDED CONFIGURATION |
Windows 7 |
Windows 10 |
64-bit operating system, x64-based processor |
64-bit operating system, x64-based processor |
RAM Memory : 2GB |
RAM Memory : 4GB (8GB or more for large projects manipulation) |
|
DirectX10 compatible GPU |