Lot of 2 Barco / Folsom VMS-100 "ScreenSHAPER" Warp Processors

Vendu Voir des articles similaires EUR 273,15 Achat immédiat ou Offre directe, Garantie client eBay
Vendeur: clickykbd ✉️ (776) 100%, Lieu où se trouve: Austin, Texas, US, Lieu de livraison: US et de nombreux autres pays, Numéro de l'objet: 192992711202 Lot of 2 Barco / Folsom VMS-100 "ScreenSHAPER" Warp Processors. Listing is for LOT OF 2 - *Rare* Barco Folsom VMS-100 'ScreenShaper' SXGA Image Processors (Warp, Rotation, Keystone, Geometry Correction) Condition is Excellent for a 2004 product.  Very minor racking scrapes on the bottom panels.  Display is bright, passes full self tests. Two power cords included. Rack ears included and in good condition. Note the mac and monitor shown in photos are not included, only for testing. These units were a drop in solution for projectors that lacked full geometry correction features, or for doing custom warp shapes on unusual surfaces (think dedicated projection mapping tools).  Can operate in rotation mode or warp/keystone mode.  Supports edge feathering for blending multiple projectors etc. Domestic Returns accepted, buyer pays return ship. Will ship USPS Priority Mail. Thanks for looking! Product Details from Barco Website: ScreenSHAPER is a self-contained 19-inch rack mount unit. The unit processes an input image to correct geometry errors introduced when an image is projected off-axis (keystone correction) or on a screen that is not flat in Warp Mode and for non-curve applications to adjust overlap region aberrations caused by lens distortion or imperfect projector placement. However, in Rotation Mode, ScreenSHAPER performs image rotation, image mirroring and scan conversion. ScreenSHAPER accepts high-resolution video in analog RGB or digital DVI format. The unit automatically locks to the input video and processes it in real time.The operator can process the entire input image or select an input area of interest to be scaled and processed. In Warp Mode ScreenSHAPER supports general-purpose distortion correction through the use of drag and drop controls for the alignment of image elements to fiduciary marks on the screen surface. In Rotation Mode, ScreenSHAPER supports rotation of an input image in 90-degree increments: 0, 90, 180, and 270 as well as image mirroring (flipping an image left-to-right) and inversion (flipping an image from top-to-bottom). ScreenSHAPER can perform scan conversion in addition to the specified re-mapping functions. The output format may be selected by the user to match the native resolution of the output device to optimize image fidelity. Typical Operation Warp Mode: ScreenSHAPER can be used whenever it is necessary to correct geometry errors introduced by an optical system.Typical applications include correction for distortion when an image is projected off-axis or onto surfaces that are not flat. Rotation Mode: ScreenSHAPER can be used whenever it is necessary to rotate or flip a high-resolution image. Typical applications include conversion oc vertically-scanned images to standard raster format, rotation to support displays in portrait mode (rather than in the typical landscape mode) and mirroring to correct for image flips ;introduced by optical systems. Features Accepts analog RGB or digital DVI video with resolutions up to 1280x1024, non-interlaced Automatically locks to the input video and processes it in real-time Processes the entire input image or a user-defined "area of interest" Supports independent X, Y scaling for aspect ratio correction Image flip: left-to-right and top-to-bottom Simple "drag and drop"controls are used to align image elements with fiduciary marks User-selectable Output Formats:VGA(640x480), SVGA(800x600), XGA (1024x768), SXGA (1280x1024) Supports RGB or DVI video output Simple, intuitive front panel controls support quick set-up RS-232/485 serial interface for remote control of all functions Rugged 19"rack-mount chassis Non-volatile storage of configuration data Built-in test generator Specifications Video Input Number: 1 Video Signal Format: Accepts analog (RGB)and digital (DVI)video Resolution: Supports resolutions up to 1280x1024,60 Hz, non-interlaced Input Sync Format: Separate H &V Sync,C sync or Sync on Green Connector: DVI-I connector supports both digital and analog input;HD-15 adapters are available. Termination: 75 ohms for analog video Video Output Number: 1 Video Signal Format: Outputs analog (RGB)and digital (DVI)video Resolution: Supports resolutions up to 1280x1024,60 Hz, non-interlaced Output Sync Format: Separate H &V Sync,C sync or Sync on Green. Connector: DVI-I connector supplies digital and analog output;HD-15 adapters are available. Output Impedance: 75 ohm for analog video Video Processing "Processes the entire input image or a user-defined ""area of interest"" in real time Transport delay: 2 frames User-selectable Output Format:VGA(640x480), SVGA(800x600), XGA(1024x768), SXGA(1280x1024) WARP MODE Geometry Correction: General-purpose algorithm supports precise alignment ROTATION MODE Supports independent X,Y scaling for aspect ratio correction.Supports rotation in 90-degree incrememtns: 0, 90, 180 and 270Image Flip: Left-to-right and top-to-bottom" User Controls Front Panel Controls: Electro-luminescent display,control knob and six keys provide a menu-based front panel interface to simplify set-up and adjustments.Remote Control: RS-232/RS-485 serial interface provides remote control of all functions. Physical "Width: 17""(432mm)or 19""(483 mm)with rack mount option Height: 1.75""(44.5mm)one Rack UnitDepth: 16""(454.5mm)all input/output connectors are mounted on the rear of the unit Weight: 9 lbs (4.1 kg);Shipping Weight:13 lbs (5.91 kg)" Input power 98-264 VAC,47-63 Hz,auto-ranging, 45 watts maximum Environmental Operating temperature: 0-40 degrees C Humidity: 0-95%, non-condensing
  • Condition: Occasion
  • Condition: Used but excellent cosmetic and functional condition. Very minor blemishes (very minor skuffs from racking, very minor paint chips, top and bottom panels only).
  • Model: ScreenSHAPER
  • Color System Type: VESA
  • Type: Processor
  • MPN: VMS-100
  • Brand: Barco
  • Form Factor: Rack-Mountable
  • Video Input: DVI-I
  • Video Output: DVI-I
  • Functions: Warp Processor, Keystone Processor, Geometry Correction, Rotation Processor, Cross-Converter

PicClick Insights - Lot of 2 Barco / Folsom VMS-100 "ScreenSHAPER" Warp Processors PicClick Exclusif

  •  Popularité - 7 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 660 days for sale on eBay. Super grande quantité suivi. 1 vendu, 0 disponible.
  •  Meilleur Prix -
  •  Vendeur - 776+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif