SERVICE DE RÉPARATION D'ALIMENTATION pour hp 8563e 8565ec 8562e 8564e 8564ec 8565e 8563ec

EUR 388,88 Achat immédiat, EUR 333,34 Livraison, Garantie client eBay
Vendeur: testcalinstruments ✉️ (3.055) 100%, Lieu où se trouve: Diamond Bar, California, US, Lieu de livraison: WORLDWIDE, Numéro de l'objet: 183593560843 SERVICE DE RÉPARATION D'ALIMENTATION pour hp 8563e 8565ec 8562e 8564e 8564ec 8565e 8563ec.

TEST CAL INSTRUMENTS

this is not a listing for a purchase! please read!

this is for a power supply for any hp spectrum analyzer prefix 856xx 

it is a listing for a repair , you send yours in to us. 

The most economical , high value service  in the USA in Repairs, Rentals, Calibration , Parts, Supply of HP Agilent Analyzers, wiltron and anritsu  and SRS equipment. 

the following is a long list of what I offer for various pieces of equipment. the 200$ ebay fee is per repaired part  and labor only, you must pay for parts or provide them to me . here is a more accurate list of prices and services:

Test Equipment Repair Rates :

856xx  series Spectrum analyzer repairs :

Basic troubleshooting /repair flat  fee of labor alone : 200$ (no charge if we can’t isolate the issue) ( 200$ eval fee if you choose not to have repair done which goes toward repair if you choose to have me repair it)( we also offer to buy parts units if you decide its more to fix than its worth, and in that circumstance eval fee is waived.

Rythm repair 1300$ (actual Repair of rythm alone) + 200$ labor (includes removal, shipping to and from microbonding facility , installation, realignment , and performance verification) after this is completed a full calibration must be done which is 350$ /300$ (done manually) 8563e/c / 8562e/c

Sbtx repair 1500$ (repair of sbtx alone) + 200$ labor (includes removal, shipping to and from microbonding facility , installation, realignment , and performance verification) after this is completed a flatness calibration must be performed which is 500$ and all automated)  8564e/ec / 8565e/ec

Power supply repair 300$/500$ / 600$ (300$ if  component level repair and  No installation or troubleshooting , 500$ for component level repair including troubleshooting and installation ,   600$ for board swapping ) breakdown: 400$ for ps part swap + 200$ for labor which includes removal,troubleshooting and installation)  all E and EC models

A15 repair 300$/500$/700$/  ( 300$ for component level repair with no installation/troubleshooting, 500$ for troubleshooting/Installation and component level repair , 700$ for board swapping which is 200$ labor and 500$ for the board swap) for all E and EC models

A14 200$ for labor which includes troubleshooting/Installation(component level repair only for 8562xx,8563xx ,8564xx,8565xx and charge for component level alone is 700$ )(8560e and 8561e a14 board swap is 200$ for the board itself)

Yto repair 700$/800$/900$/1000$ (700$ for yto repair alone, 800$ for the yto part  alone with no exchange or core , 900$ for exchange repair plus installation which includes troubleshooting,removal, sending out to microlab and back, reinstallation, realignment and performance verification and  realignment  , 1000$ for installing a  refurbished yto without a core exchange )

Crt exchange : 200$ for labor plus 200$-350$ per crt ( 200$ c grade, 250$ B grade 300$ A- grade , 350$ NEW A+ grade)

Eprom programming: 50$ for reprogram and 100$ for eprom plus programming

Cpu board exchange A2 : 200$ for labor 300$ for board , 250$ for board without eprom (includes troubleshooting/installation)

A3/A4/A5/ Board exchange : 200$ for labor and 100$ per board  (includes troubleshooting/installation)

Attenuator repair : 200$ if part comes in alone , 200$ labor for troubleshooing/Installation , so 400$ total with exchange , or 300$ for the part with no core plus 200$ to install totalling 500$. ( 50$ discount for 8560-8562e/ec attenuators)(for 40 and 50 ghz attenuators Cost of labor is 200$ but part is 700$ for exchange and 600$ for repair with core exchange  totalling either 900$ or 800$ )

Option 006 or 008 upgrades ( 400$ parts and labor for opt 6 30 hz and 400$  parts and labor for opt 8 sig id ) option 001 : 200$ 2nd if out, and option 5 : 200$  alc ),

We dont sell parts to beautify your analyzer except for crts.

859xx Spectrum analyzer repairs:

Basic troubleshooting /repair flat  fee of labor alone : 200$-400$  depending on hours put in (no charge if we can’t isolate the issue) ( 200$ eval fee if you choose not to have repair done which goes toward repair if you choose to have me repair it)( we also offer to buy parts units if you decide its more to fix than its worth, and in that circumstance eval fee is waived.

Attenuator repair : 200$ for the actual attenuator repair plus 200$ installation/troubleshooting/basic recalibration = 400$ total (all models)

Power supply repair : 350$  , breakdown: 200$ for labor , 150$ for part, (always core exchange for this repair)

Cpu board repair (exchange only) : 200$ labor + 200$ parts = 400$ total

Yto repair 700$/800$/900$/1000$ (700$ for yto repair alone without installation, 800$ for the yto part  alone with no exchange or core and no installation , 900$ for exchange repair plus installation which includes troubleshooting,removal, sending out to microlab and back, reinstallation, realignment and performance verification and  realignment  , 1000$ for installing a  refurbished yto without a core exchange ) 2.9-26.5 ghz models only

Yto repair  200$ labor + 200$ for parts = 400$ total           ( for 1.8 ghz models only )

Card cage repair : 50$ for part 200$ for labor =250$ total (all models)

Analog interface exchange repair: board exchange only, price varies by availability and model

Dual mixer exchange repair : 700$ parts and labor (for all 859xx and 856xx models that have one)

Comb filter exchange : 500$ parts and labor

Switch exchange : 500$ parts and labor

Tracking generator repair : 700$ parts and labor ( 50% success rate which is based on component level repair only)

Counterlock exchange repair: 300$ parts and labor

Option upgrades : 200$ labor plus part . ( we dont perform tracking generator upgrades as its too labor intensive and hard to find the parts and cabling)

HP agilent 836xxx series signal generators :

Flourescent display upgrade : 1200$ (includes display at 1000$ and 200$ labor)all models)

SRS equipment repair :

Dg535 external clock error repair: 300$

Sr620 power on /intermittent repair : 300$  

Anritsu /Wiltron Signal Generator 68xxxx, 69xxx,mgxxxx repair :

Prices vary but basic labor cost is 500$ and up plus parts  (all models from 8.4 to 65 ghz )

Lcd upgrade : 600$ (much brighter) 300$ for parts and 300$ labor)

Power supply repair : 500$ (removes phase noise sidebands and fixes no startup) (75% success rate)( an extra 200$ for board swapping fee  if we cant fix it at component level)  

Calibration cost : 400$ (includes all automated realignments)

Option upgrade cost : 300$ plus parts plus recalibration fee of 400$  ,

C series processor board repairs : 500$,  fixes not being able to store save data or brightness.

**********8563e and 8593e have an extra 30$ charge (350$ total) since it takes 3 times as long and is 3 times the trouble.all the other 26 ghz ones are 320$> 13 ghz  models are only 300$, 6.5 ghz models are 250$> 3 ghz models are only 200$> *******************

Convert your hp agilent 856* series 22 ghz analyzer to 26.5 ghz with no added mixers by using my secret cal technique! 

8563E has an extra 25$ insurance fee on shipping, all other units are standard 320$.  I can ship under your shipping account number no problem.

We offer  N.I.S.T. traceable calibrations with certificate and sticker.

I offer 1 year  warranty on all calibrations and repairs!  (does not include cal out of spec or other issues,  due to defective hardware but rather only  if the cal drifts naturally or the repair does not fix the issue due to my fault.) cannot pay for shipping back to me or you for free recal or re-repair) 

My calibrations should last at least 2 years, maybe 3 (depending on use)  before   needing a recal

 Most common types of cal from companies like tmi, metrictest, teknet , test equipment connection, testmart, cal right,etc...     :

type 1. Run the unit thru the test and adjustment module in the back with a software (one of 3 providers) that connects to a signal generator, splitter and power meter , and old style computer  which merely tests the functionality of the unit and does not adjust any parameter in any way. the software gives a pass/fail if it performs within a wide gap  of spec. (does not have to be accurate whatsoever to pass!) they then give you a cal certificate printed by the software  stating if it passes or fails. the flatness accuracy can be within 6 db range of error! unacceptable!  average price : 400$  plus shipping and handling 2 ways

type 2. Companies like TMI dont have any cal automated software (not that you need it if you know what you're doing and can afford to spend some extra time on it) , they just have a tech turn it on and go thru some basic routine to test functionality. I have had multiple units come to me from TMI and other cal labs with a new cal from them and it was more than 8 db off with many holes , frequency was wayyyy out of spec! not even close!  and span accuracy was way out of spec because they had hardware defects ! yet somehow the units had  cal certificates and they verified that it was indeed calibrated and passed with no issues within spec. this has happened many times between me and my partner and other colleagues ,  but tmi is not the only company out in the test equipment field that is notorious for this kind of service.  average price: 300$

type 3. companies like cal right in san diego are actually legit cal companies. they can do a great job realigning the flatness with their software as well as a frequency adjustment on some units , even if its way off to begin with, they also include a data report   printed by the software which can be tricky to interpret . they can also fix basic issues for fair prices but their cal cost is way higher than what I charge. and they only do basic sytf realignment and flatness adjustment ! there are about 6  other adjustments including  span adjustments that need to be calibrated to ensure your analyzer functions like new again and there simply is not any cal company in the country that performs all the adjustments in their cal routine. I am the only one. and my price is rediculously cheap . average price for type 3 cal : 700$

Type 4. this is my cal routine and consists of r ealigning the loda amplitude and dual mixer alignment  on the a14 board, then realign the yig/yto  which is the span accuracy adjustment, and cal out freq which calibrates the frequency accuracy across the spectrum (10 mhz clock cal) ,then check and adjust the a16 board micro adjustment ,and verify the sampler on the a15 frequency synth board is where it should be , then perform the sytf (E series)/ytf(A series) realignment which calibrates the amplitude and preselector, then complete flatness calibration and realignment according to the service manual but doing a secret technique I figured out from years of experience that allows me to program the analyzer to support up to 26.5 ghz without having the option 26 ! some analyzers may be only able to get to 26 ghz within spec after my flatness adjustment but most can get up to 26.5  perfectly within spec! Every analyzer you buy won't be able to peform past 22 ghz within spec without my adjustments,  this is a huge added bonus for the unit that greatly increases its value  and It's all free, no extra charge , included in the basic cal! .I also check all the voltages to make sure the power supply across all 8 boards are right on the money. and I also adjust the crt as well to ensure that you get the most brightness and focus as possible! (quite often I can convert a bad crt into a good crt with only a simple series of adjustments! ) my units will perform like new in regards to amplitude,  attenuator, span and frequency accuracy unless there is a hardware defect and if that it is the case I can usually tell you what needs replacing or repairing and can offer you a quote . My repair prices are generally half that of any other cal lab because I work out of home . Feel free to come by my home lab any time to have a tour in fontana california 92335          My price for this extensive cal/refurb job : only 320$  !  I can also include basic cal data for an extra 100$ which includes the basic things such as amplitude deviations, and final measured freq for 10 mhz and 300 mhz outputs , span accuracies,attenuator loss, etc....

(IF you merely need a simple cal such as performance verification, (type 2 cal) I offer that at only 150$ and can tell you if there are any minor issues with it and what the problem likely is.) If you need performance cal plus ytf realign/flatness only (type 3 cal) I can do it for only 250$. I don't use automated software so I Don't have data reports but that's because its really not necessary, if your unit performs like new then the accuracy will be so good, its a waste of time and money to generate the data report right? plus you probably won't be able to understand the  report anyways. data reports are basically only good for type 1 calibrations, where nothing has been adjusted and you just want to see how well it still performs after all these years of use. after all the adjustments you can pretty much count on that it will perform dead on. and if not then it means you have a hardware defect which should be fixed.

I can Repair and calibrate all hp agilent 8563e*   8562e 8561e 8560e 8563a 8562a  8562b 8561a  8561b  8560a    prices are based off 8562E / 8562a and below. any 8563E adjusments are 50$ more as they require much more time and devotion for cal than all the other listed analyzers. in that case I can increase the buy it now price or decrease if you need a simple performance cal. I don't have the necessary equipment for 40 ghz or 50 ghz flatness  calibrations. there are only 1 or 2 labs in the country that can do that and will probably run you about 1000$ .  but I can do all the other adjustments for that model (8564,5E)no problem.
some sources are selling their calibrations(which aren't even calibrations at all, merely a quick run thru of the unit ) for more than triple what I am asking! my service is 10 times better and more value than any cal service in the country guaranteed ! how am I able to do this? its because I'm specialized in only adjusting 856 series analyzers! so if you have any 856 series, send it in and you can be sure that your unit will perform like new once you get it back! and if I cant make it run like new, I will tell you what you need to repair it or at least be able to tell you which parts to check. I also repair these units all day so if it doesn't pass cal because of a hardware defect, we may be able to work something out in the future if that would arise. Also if you have a lab that has lots of these 856 series analyzers,  I can offer my training services to your techs to teach them how to fully adjust and calibrate your units up to 26.5 ghz  so that way you don't waste thousands of dollars a year sending these in for cal and risking damage or shipment issues , or the trouble of packing and shipping them in general. not to mention further the capacity of your 22 ghz only analyzers.  that price will be around the same as this ebay auction so feel free to pull the trigger and do the buy it now for that as well if you need my training services. If your'e located in the southern california area, it would be very easy for me. or you can fly me out to your state and accommodate me there for a day or two and I'll only charge you the flat 300$ as well . (because I love to travel) also if you have techs , you can bring them to me and I can train them at my lab in california for the same price (300$ ). and that will include advice any time future issues at your lab would arise . Read my 100 Percent Positive FEEDBACK! My feedback says it all! I currently refurb these units and run all cal myself. you can read the feedback or view my other listings if you want to make a purchase on a unit with all these adjustments . all current 856 listings have all been refurbished with this service I offer. I don't have the software yet for the 859 series units . they arent as easy to adjust but I can perform a few adjustments on them such as yto (span) realignment and frequency realignment as well as the internal calibration procedure. the flatness routine requires software which is about 10,000$ for the software alone  per model . I do all my adjustments manually according to service manual and triple check all frequencies  to make sure its flawless as possible. I can usually take an analyzer that has incredibly bad amplitude accuracy with no support of 22 to 26.5 ghz and make it fully support up to 26.5 ghz in almost perfect amplitude accuracy  which is also a great added bonus for buying my calibration. no other cal lab knows how to do this except me. so if you want your 22 ghz analyzer to support 26.5 ghz you need to buy  my cal . some analyzers can only get good accuracy to about 25.5 ghz but most can get all the way up to 26.5 with no problem by using my technique. I accept Paypal or cash in person on pickup. I have a lab here you can use to verify it works perfectly before taking it home with you. I also offer cover painting /dent/scratch removal or minimizing for these units using a powder coat technique which electrically bonds the paint to the metal making it scratch proof and perfect for refurbers. the color is very similar to hp and a shade of military green/grey . there are other companies such as teknet that offer cheap spray paint only that scratches right off ! our job is almost identical to hp's and has a similar texture as well unlike the other companies which is just flat with no texture. the price is 100$  plus shipping for paint only and 150$ for dent removal with paint. we can minimize major dents and take out minor dents completely. you can also purchase it thru this auction. just let me know so I can lower the buy it now price. I also offer replacement services for the same price in this auction and buyable thru this ebay auction . you must provide the parts . I do have lots of parts units for these units however it is better if you can supply the parts. If you cant find any I may be able to sell you a part thru another ebay auction as well. I can replace : attenuator, yto, ytf, sytf, any of the 7 circuit boards, crt, dual mixer, lo dist amp, power supply, etc ... . service will cost at most 300$(about 1/3 of any other company out there , and wouldn't you rather have it repaired by a specialist such as  myself? I can do it in one day and ship it right back to you! ) . if interested tell me what you need replacing and then I can adjust the buy it now. price will include basic realignment of system as well . troubleshooting is much more expensive however and very time intensive and would cost thousands of dollars at another company that does not specialize in the 6 series like me. but if you already know the bad part for sure, I am definitely  the guy to send it to. And It can all be paid and ordered thru this ebay auction. If you need trouble shooting I could charge only around 30$ an hour(1/3 the cost of any other lab)  and then pay the flat ebay service  fee of say 300$ for the replacement and realign of the part. and then an extra 200$ if you wish to have my full cal routine on top of that. all services can be paid thru ebay and paypal on this listing. All services from me must go thru ebay as I am new to advertise these services here and need the feedbacks. you can however pay me cash  in person for the services . paypal is not needed. For test equipment I am the largest used Stanford Research Systems dealer in the world. I am also known for my HP / Agilent spectrum analyzer and function generator sales as well.  For test equipment I am very knowledgeable with SRS  and HP agilent  equipment : pricing , testing,reconditioning,  and fixing basic issues. Every price that is listed is a price that the same unit sold for before at least  a few times. I am not like the other dealers who list for rediculous prices that no one has ever bought it for in hopes they can make themselves rich. All my prices sci elec test instruments are fair going rate prices. Please feel free to email me any questions as I will respond immediately! Average shipping price back to you  fully insured  is 60$. It may be more or less depending on your zip code and your analyzer. if you have an 8563e living in new york  it will likely be higher. and 8561a  living in california will be  lower. you must provide excellent shipping box and soft foam. no peanuts accepted. preferably double boxed and or vacuum foam packed. bubble wrap is ok if paired with soft foam. Please dont ship me an analyzer without soft foam. you can buy it at any pool store( foam noodles ) if box is not doubled, then the side walls need to be thick and strong. Drop off and pickup are no problem. I'm located in (southern california) Fontana california 92335. I also have a partner in Irvine you can leave it with as well since I work with him there often. Fontana is near Los angeles , san bernardino and orange county I accept international worldwide calibrations however beware that shipping is minimum of 300$ each way .

Test Equipment Repair Rates :

856xx  series Spectrum analyzer repairs :

Basic troubleshooting /repair flat  fee of labor alone : 200$ (no charge if we can’t isolate the issue) ( 200$ eval fee if you choose not to have repair done which goes toward repair if you choose to have me repair it)( we also offer to buy parts units if you decide its more to fix than its worth, and in that circumstance eval fee is waived.

Rythm repair 1300$ (actual Repair of rythm alone) + 200$ labor (includes removal, shipping to and from microbonding facility , installation, realignment , and performance verification) after this is completed a full calibration must be done which is 350$ /300$ (done manually) 8563e/c / 8562e/c

Sbtx repair 1500$ (repair of sbtx alone) + 200$ labor (includes removal, shipping to and from microbonding facility , installation, realignment , and performance verification) after this is completed a flatness calibration must be performed which is 500$ and all automated)  8564e/ec / 8565e/ec

Power supply repair 300$/500$ / 600$ (300$ if  component level repair and  No installation or troubleshooting , 500$ for component level repair including troubleshooting and installation ,   600$ for board swapping ) breakdown: 400$ for ps part swap + 200$ for labor which includes removal,troubleshooting and installation)  all E and EC models

A15 repair 300$/500$/700$/  ( 300$ for component level repair with no installation/troubleshooting, 500$ for troubleshooting/Installation and component level repair , 700$ for board swapping which is 200$ labor and 500$ for the board swap) for all E and EC models

A14 200$ for labor which includes troubleshooting/Installation(component level repair only for 8562xx,8563xx ,8564xx,8565xx and charge for component level alone is 700$ )(8560e and 8561e a14 board swap is 200$ for the board itself)

Yto repair 700$/800$/900$/1000$ (700$ for yto repair alone, 800$ for the yto part  alone with no exchange or core , 900$ for exchange repair plus installation which includes troubleshooting,removal, sending out to microlab and back, reinstallation, realignment and performance verification and  realignment  , 1000$ for installing a  refurbished yto without a core exchange )

Crt exchange : 200$ for labor plus 200$-350$ per crt ( 200$ c grade, 250$ B grade 300$ A- grade , 350$ NEW A+ grade)

Eprom programming: 50$ for reprogram and 100$ for eprom plus programming

Cpu board exchange A2 : 200$ for labor 300$ for board , 250$ for board without eprom (includes troubleshooting/installation)

A3/A4/A5/ Board exchange : 200$ for labor and 100$ per board  (includes troubleshooting/installation)

Attenuator repair : 200$ if part comes in alone , 200$ labor for troubleshooing/Installation , so 400$ total with exchange , or 300$ for the part with no core plus 200$ to install totalling 500$. ( 50$ discount for 8560-8562e/ec attenuators)(for 40 and 50 ghz attenuators Cost of labor is 200$ but part is 700$ for exchange and 600$ for repair with core exchange  totalling either 900$ or 800$ )

Option 006 or 008 upgrades ( 400$ parts and labor for opt 6 30 hz and 400$  parts and labor for opt 8 sig id ) option 001 : 200$ 2nd if out, and option 5 : 200$  alc ),

We dont sell parts to beautify your analyzer except for crts.

859xx Spectrum analyzer repairs:

Basic troubleshooting /repair flat  fee of labor alone : 200$-400$  depending on hours put in (no charge if we can’t isolate the issue) ( 200$ eval fee if you choose not to have repair done which goes toward repair if you choose to have me repair it)( we also offer to buy parts units if you decide its more to fix than its worth, and in that circumstance eval fee is waived.

Attenuator repair : 200$ for the actual attenuator repair plus 200$ installation/troubleshooting/basic recalibration = 400$ total (all models)

Power supply repair : 350$  , breakdown: 200$ for labor , 150$ for part, (always core exchange for this repair)

Cpu board repair (exchange only) : 200$ labor + 200$ parts = 400$ total

Yto repair 700$/800$/900$/1000$ (700$ for yto repair alone without installation, 800$ for the yto part  alone with no exchange or core and no installation , 900$ for exchange repair plus installation which includes troubleshooting,removal, sending out to microlab and back, reinstallation, realignment and performance verification and  realignment  , 1000$ for installing a  refurbished yto without a core exchange ) 2.9-26.5 ghz models only

Yto repair  200$ labor + 200$ for parts = 400$ total           ( for 1.8 ghz models only )

Card cage repair : 50$ for part 200$ for labor =250$ total (all models)

Analog interface exchange repair: board exchange only, price varies by availability and model

Dual mixer exchange repair : 700$ parts and labor (for all 859xx and 856xx models that have one)

Comb filter exchange : 500$ parts and labor

Switch exchange : 500$ parts and labor

Tracking generator repair : 700$ parts and labor ( 50% success rate which is based on component level repair only)

Counterlock exchange repair: 300$ parts and labor

Option upgrades : 200$ labor plus part . ( we dont perform tracking generator upgrades as its too labor intensive and hard to find the parts and cabling)

HP agilent 836xxx series signal generators :

Flourescent display upgrade : 1200$ (includes display at 1000$ and 200$ labor)all models)

SRS equipment repair :

Dg535 external clock error repair: 300$

Sr620 power on /intermittent repair : 300$  

Anritsu /Wiltron Signal Generator 68xxxx, 69xxx,mgxxxx repair :

Prices vary but basic labor cost is 500$ and up plus parts  (all models from 8.4 to 65 ghz )

Lcd upgrade : 600$ (much brighter) 300$ for parts and 300$ labor)

Power supply repair : 500$ (removes phase noise sidebands and fixes no startup) (75% success rate)( an extra 200$ for board swapping fee  if we cant fix it at component level)  

Calibration cost : 400$ (includes all automated realignments)

Option upgrade cost : 300$ plus parts plus recalibration fee of 400$  ,

C series processor board repairs : 500$,  fixes not being able to store save data or brightness.
We currently have too much inventory! WE HAVE DROPPED OUR PRICES FOR A LIMITIED TIME! ACT NOW DONT MISS OUT! LIQUIDATION SALE!!!! We dropped prices on almost all our listings by $400! until 2018! act fast - These deals wont last!
IMPORTANT! Due to PayPal's new rule that requires sellers to absorb the 3% fee on any returns. We will need to charge a 3 % restocking fee for any and all returns / refunds. 
NEW POLICY READ!!!  Buyer to pay shipping for  both ways for all returns.We will repair all parts and labor for no out of pocket cost to you except the shipping .For any refunds there is a 3 % restocking fee unless the item is exchanged which is easier for us often  since we have multiples of these in stock usually . Buyer will also accrue another 3% paypal fee having the money returned by using paypal if paid via paypal originally. (this new rule is because of paypal’s new greedy way of not returning the original fee back on returns/refunds and I regrettably have to bring this new policy to you the buyers.)The point is you will save a lot more money doing an exchange over doing a return
  • Condition: Occasion
  • Unit Type: Complete Systems & Mainframes

PicClick Insights - SERVICE DE RÉPARATION D'ALIMENTATION pour hp 8563e 8565ec 8562e 8564e 8564ec 8565e 8563ec PicClick Exclusif

  •  Popularité - 16 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 1.928 days for sale on eBay. Super grande quantité suivi. 2 vendu, 10 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 3.055+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif