Système de contrôle de mouvement CNC Gecko G540 48v 12,5a & 3 Nema 23 300 oz dans moteurs 3,5A

EUR 844,44 Achat immédiat, Cliquez pour voir les frais d'expédition, Garantie client eBay
Vendeur: len1007 ✉️ (2.771) 100%, Lieu où se trouve: Spring Hill, Florida, US, Lieu de livraison: AMERICAS et de nombreux autres pays, Numéro de l'objet: 142506267150 Système de contrôle de mouvement CNC Gecko G540 48v 12,5a & 3 Nema 23 300 oz dans moteurs 3,5A .

This listing is long do to amount of details to be covered with this system. Please review the entire listing reviewing all the videos to understand the system your purchasing.

This listing is for Robotic Motion Controller package.

This system is built around the Gecko Drive G540 digital integrated micro stepping 4 axes driver system.

Here's an overview on the drive covered from Marcus application engineer at Gecko Drive.

GeckoDrive G540 4-Axis Stepper Controller Product Highlights

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

This drive is covered by the longest warranty in the industry with 3 years, and offers full US support.

 The power supply you select for your G540 motion controller is critical as it will provide the system's speed, and required amps to support all four of the G540's axes. My unit is designed in house to provide all the volts the drives require with a surplus of amps to assure your system's supported even if you decide to expand your system to five, or six axes with an ESS system here.  https://www.ebay.com/itm/133064380079

The system uses my 48v 12.5a (600w ) CNC. These units are all calibrated in house prior to shipping to you with a FLUKE 179 TRUE RMS multimeter.

 The unit supports both 110v, and 220v power inputs for all the worlds power outputs via a selector switch. 

The unit was custom designed, and supports a single 48v power output rail with  10 negative, and  10  positive terminals for power output as the pictures reflect. 

This allows for much less labor, and monetary investment required for CNC robotic system configurations using multiple accessory hookups as typical power supplies only have 3 terminals available on the V-, and V+ terminals requiring additional spending with terminal splitters to eliminate "Daisy Chaining" which is best practice when assembling your controller.

This power supply was designed exclusively for robotics use. That being said most switching power supplies simply feature a toroid passive noise filter which doesn't provide as efficient EMI mitigation as an actual EMI noise filter. 

This unit is the only one that  features  an actual  built in EMI filter covered in the video below for the cleanest possible power output to provide your CNC robot with.

The system also has an integrated brushless fan that's controlled thermostatically based on the ambient internal temperature which is a critical feature for any unit being installed in a CNC electronics enclosure.

The unit also features built in overload protection, and automatic shutdown with reset, and recovery

The complete specs are below.

Also included is three of my Nema 23 300oz/in (18.75in/lbs ) 3.5a (2.4mh inductance) dual 8mm motor shaft stepper motors for the most durability, and compatibility for system retrofits on the market. These motors are a perfect combination for the Gecko. I also include the matching resistors for the G540.

The motor specs are below with dimensions.

                       

This is the only engineered G540 motion control system online that features a 12.5a (600w) power supply as standard equipment as all should to support the 4 axes capabilities power requirements. Compare the other units on the market, and you will soon realize why my build lead times can be in excess of eight days. The typical overlooked details like including Tripp Lite IEC power cord with Lifetime warranty, and 3 of my pro solderless connectors for ease of motor hookup integration, and servicing.

This version reflects my new REV2 model utilizing the most advanced controller design for the G540 driver system to date, featuring an EMI coating applied to the electronics enclosure. This coating is used now as standard on all my chassis including the barebones system.

This Revision also features my custom built tinned braided copper shielded E-stop switch cable for the cleanest possible signals. The shielding drain of this cable is properly grounded to the chassis. The system also includes three of my 20awg 13ft 300v, 80c temp rated DOUBLE SHIELDED motor cables made using signal cable for maximum durability, and flexibility.

These are the only double shielded cables offered for this drive on the market, and their included with every full system I build.

                                                                  

Please understand this system can be configured to suit your particular retrofit, and budget. I don't build "cookie cutter" systems, so if your looking to purchase this system, and have questions about using it with your system please message me. I can automate virtually any system pending your budget supports what your looking to accomplish.

Below is an overview video of me covering this system in detail.

Gecko G540 Motion Control System Rev2 Edition Updates!! - YouTube

Video will open in a new window

[isdntekvideo]

Here's an overview video of my 13ft. 20awg Double Shielded DB9 pre-made motor cables which are included with the system.

Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube

Video will open in a new window

[isdntekvideo]

These units can easily achieve under .001 tolerances when axis calibration, are completed, when using a metal substrate CNC chassis. This is a live overview of it being achieved on a Chinese 3020 that's completely stock except for the G540, and my power supply. He achieved a ridiculous speed increase as well.

MythBusted  Stepper Motor Accuracy Less Than .001in! Gecko G540 - YouTube

Video will open in a new window Using the eBay App? Paste link into a browser window:

[isdntekvideo]

I invite you to watch another video of a previous client of mine. He wanted a controller to automate a 16ft chassis . He fabricated the table himself, and I handled all the motion control components. The controller he's using is a 6 axes custom UC-100 USB based system I built him for this specific chassis It uses 6 Gecko Drives G251x drivers. These are the same drives inside the G540's black enclosure.

Gecko G251x Driver Myths..16ft Table Run With Gecko G540 Drivers...

Gecko G251x Driver Myths..16ft Table Run With Gecko G540 Drivers... - YouTube

Video will open in a new window

[isdntekvideo]

The product quality you can expect when you calibrate your system.

The Products You Can Expect When You Calibrate, And Tram Your System.. - YouTube

Video will open in a new window

[isdntekvideo]

 The system's build includes the following components assembled into your "turnkey motion contoller".

Each terminal of the system is soldered to provide the lowest possible resistance utilizing Kester 186 RMA NO CLEAN flux, and Kester #44 solder, and once completed each terminal is then insulated with 600v rated  heatshrink to provide the industry standard for safety. The wires 16awg, and 20awg (E-stop has no voltage/current ) are then secured internally with wire ties, and adhesive backed hold downs for optimal neatness, and airflow.

  • Gecko Drive G540 REV8 (2020 Edition ) Integrated 4 axes digital micro stepping driver system (3 year warranty )

  • Aluminum EMI dipped pre-machined 12in x 12in x 4in diameter (1.5mm thick) aluminum enclosure 

  • Sanyo Denki industrial 100,000 hour  48v (65 Cubic Feet Minute)  Brushless 60mm x 38mm  Cooling Fan

  • Three heatsinks installed on the G540 with thermal adhesive for maximum heat conduction

  • 48v 12.5a (600w ) power supply supporting 110v/220v input (Each system's unit is calibrated with a FLUKE 179 TRUE RMS multimeter for accurate power input )

  • 3 Nema 23 3.5a 300oz/in (18.75in/lbs ) dual 8mm shaft four lead stepper motors with matching resistors

  • 3 13ft 20awg double shielded  pre-assembled motor cables with gold plated DB9 male, and female connectors 

  • 3 Pro-solderless motor connectors for simple motor installation, and servicing

  • 6ft. DB25 male to male parallel port communication cable for the system to PC connection

  • 250v 15a LED illuminated KCD2 power switch 

  • E-stop switch featuring "twist, and release" reset

  • 250v 10a external fuse holder with fuse (The power supply, and drive is also fuse protected for triple redundancy )

  • 125v 15a 110v  Auxiliary power Input that (supports accessories up to 5a )

  • 250v 10a IEC power port that supplies the system's power

I look forward to working with you to support your business model utilizing micro manufacturing.

 The lead time on your build will be messaged to you upon receiving your order. Please keep in mind my feedback reflects I don't rush builds to increase my profits. The average lead time on a system is 5 days, but can easily be up to 10 do to the time of year. If the lead time isn't acceptable you'll be refunded immediately. I recommend contacting me first if you need you system by a certain time to see if its doable.

Please keep in mind the system weighs more than 12lbs and the motors are an additional 8.5lbs, so they must be shipped in two packages in order to prevent damages.

  Shipping the system in the US is $22.85 and will be shipped via UPS Ground with signature on each package due to the value involved. If you require expedited shipping, please contact me for a quote.

All my international orders are handled through eBay's Global Shipping Program as they offer us both the best protection against loss, and damages. Please review their policy for a shipping quote based on your specific location as they don't disclose it to me. 

All my international clients' systems will be configured to 220v prior to shipping. You must supply your adapter power plugs for your countries location.

     
  • Condition: Neuf
  • Model: Gecko g540
  • Number Of Axes: 1- 4
  • Input Voltage: 110v-220v
  • MPN: G540 Controller System
  • Brand: Gecko Drive
  • Application: 1-4 axes
  • Run Method: Bipolar

PicClick Insights - Système de contrôle de mouvement CNC Gecko G540 48v 12,5a & 3 Nema 23 300 oz dans moteurs 3,5A PicClick Exclusif

  •  Popularité - 140 personnes suivent la vente, 0.1 de nouvelles personnes suivent la vente par jour, 2.389 days for sale on eBay. Super grande quantité suivi. 40 vendu, 10 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 2.771+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif