Elimia DOL 5.5-8-480PH 5 HP 480V Magnetic Motor Starter Nema 4X UL 508A LISTED!

Vendu Voir des articles similaires EUR 138,89 Achat immédiat, 30-Jour Retours, Garantie client eBay
Vendeur: elimia_sales ✉️ (8.416) 100%, Lieu où se trouve: Attalla, Alabama, US, Lieu de livraison: US et de nombreux autres pays, Numéro de l'objet: 132090764029 Elimia DOL 5.5-8-480PH 5 HP 480V Magnetic Motor Starter Nema 4X UL 508A LISTED!. This is our "PH" line of magnetic enclosed motor starters.  These are available in this configuration up to 40 HP @ 480V; 20 HP @ 230V 3-phase; 10 HP @ 230V 1-phase. The PH line is certified UL 508A and assembled in our new facility in Fort Payne, AL. You will not find a better enclosed starter for less cost than Elimia lines.

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia.  We offer an extensive line of standard motor starters as well as custom built units.  Combination starters and reversing starters are also available in standard and custom configurations. 

This is for a new magnetic motor starter designed to run general equipment that starts and stops from push-button controls.

Pre-wired for easy installation.

This starter includes a momentary start/stop button with LED indicator.  It is a real industrial grade, UL listed switch with chrome metal bezel.

The unit will arrive completely assembled in a real nice American made NEMA 4X polycarbonate enclosure. Approximate size is 8 x 8 x 5 inches. All units come with mounting feet as seen.

Model Number: DOL 5.5 - 8 - 480PH

Model Explanation:

DOL = Latching Start/Stop push button

5.5 -8  = Overload Size

480 = Coil Voltage

PH = Polycarbonate hinged enclosure

Sized for 5 HP @ 480V 3 phase.

IEC type motor starters are made up of primarily two parts. A contactor and overload device. Both devices have maximum ratings and the overload has maximum and minimum ratings. You should choose a motor starter that fits both criteria. If you need help please email or call, we will be glad to assist.

To size your starter properly you must determine the following:

-Three phase or Single phase

-Supply voltage ie. 120V; 208V; 240V; 480V; 600V

-Machine single motor HP

-Motor FLA (full load Amps)

-Application, what type of machine you running

We recommend that for certain machines to use a contactor the is oversized. Meaning if you have a 10 HP machine and the contactor is rated for not more than 10 HP, we recommend you go up one contactor size to a 15 HP contactor. This is recommended for hard starting machines and machines that are started and stopped frequently. Such as air compressors, blowers, vacuums etc... Also, you must size the contactor based on your supply voltage. A contactor rated for 15 HP at 240V three phase will be rated for less HP at 480V. Exceeding the contactors rating will dramatically reduce its life.  Please call if you need help.

If your supply Voltage is 208V and you want to use your supply power to power the contactor coil...  Our 230/240V coils are rated down to 196 Volts.  Now, under most cases our standard 230/240V coil will work flawlessly on 208V systems.  But, if your machine is very large for your electrical service OR your wiring run is long or undersized I recommend using a separate 120V source for the coil power.

Control voltage is  480 VAC and is pre-wired. (Note: the power source for the control wiring of this starter is pre-wired and sourced from your feeder wiring directly on the line side of the starter.  You will not need to pull in a separate power source for the controls).

The control voltage is the voltage used to activate the coil of the contactor. In the simplest install you will want a coil voltage the same as your power supply. But is some cases you might want the control voltage to be different for a host of reasons.

The overload will have an adjustable Amperage range. Your overload choice is based on your machines FLA. If your machine motor has a FLA of 10 Amps at your supply voltage then you should choose the overload where 10 Amp falls within the adjustable range. For a 10 Amp FLA we would recommend overload 9 - 13 Amps.

Our overloads can be set for manual or automatic reset operation. The overload control is pre-wired by Elimia in a way that trips the starter. This is done to protect your equipment and is one of the main purposes of a motor starter.

Our standard overload is thermal type class 10A.

Components mounted on a easy to remove back plate.

90 day replacement Elimia warranty.

Great price!

We have pre-wired DOL motor starters available from 0 HP to 200 HP.

Please call 1-855-4Elimia for more info or if we can help sizing a starter or expediting.

Elimia has assembled and supplied thousands of starters to customers all over the world. In addition to our standard products we design and built custom control panels and packaged drives. Our customers come back again and again for the value products we offer.

Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping and eBay fees. If the item has been installed and it turns out not be what you needed please call us. We will work with each customer and try to reach a resolution.

Buyers: Potential buyers registered outside the USA must get approval before bidding UNLESS the listing indicates them as a ship to location. Most small items are now available for Worldwide shipping.

There is no charge for on-sight pickup but 5% tax applies.

Please note: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products.

Payments: We accept Paypal and Credit Card payments. Credit card payments are only accepted over the phone.

We reserve the right to refuse payment from buyers registered in foreign countries or locations with non corresponding ship to addresses. Additionally, we reserve the right to refuse payment from any buyer which will feel is acting in a possible malicious manner.

Feedback: Once you are satisfied with your purchase please leave us feedback. If you have any problem with the transaction or product, please contact us.

Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
  • Condition: Neuf
  • Brand: Elimia
  • Model: DOL 5.5 - 8 - 480PH
  • Country of Manufacture: United States
  • Country/Region of Manufacture: United States
  • MPN: DOL 5.5 - 8 - 480PH
  • HORSE POWER: 5 HP
  • POWER SUPPLY: 480 VOLT
  • CONTROL POWER: 480 VOLT

PicClick Insights - Elimia DOL 5.5-8-480PH 5 HP 480V Magnetic Motor Starter Nema 4X UL 508A LISTED! PicClick Exclusif

  •  Popularité - 3 vendu, 16 disponibles. 0 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 1.672 days for sale on eBay.
  •  Meilleur Prix -
  •  Vendeur - 8.416+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif