Description:
Plastic lenses can yellow with age, reducing headlight brightness, and new lenses can be expensive. The Headlight Lens Restoration Kit lets you shine
and restore plastic lenses, including headlights, taillights, fog and directional lights. By restoring clarity to the lens, the performance of the headlight
is improved and the appearance of the vehicle is enhanced Now you can produce professional results with the Headlight Lens Restoration Kit. Kit
includes all items necessary to perform the task except for the masking tape.
Features:
Helps restore clear plastic by removing haze and discoloration
Provides a deep clean to yellowed, hazed headlights with the use of a specially designed polish and sealant
Improves visibilty and safety
One kit is intended to restore two headlight lenses.
This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by restoring your own lenses.
Easy, 5-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses.
Kit Contains:
1 masking tape
1 spray bottle with Lubricant 40ml
2 Waterproof Premium Sandpaper P800 grit
2 Waterproof Premium Sandpaper P1200 grit
2 Waterproof Premium Sandpaper P2000 grit
2 Polishing Paste 40g
2 UV Protective Paste 3ml
Process:
Mask
Protect trim and painted surfaces around the headlight lens with masking tape.
Clean & lubricant
Using the spray bottle (STEP 1), apply enough lubricant to the lens surface before sanding.
Sand
Wear attached gloves, Using three grits (P400,P800,P1000) sanding disc orderly to sand away the yellowing and surface defects from lens.
Replace with a new sanding disc if need and continue sanding until the yellow layer completely removed. Spray lubricant to the surface if
it becomes dry while sanding.
Refine
Dispense some polishing paste (STEP 2) onto the cleaning cloth to polish out the remaining scratches. When the cloth becomes dry, continue by adding
some polishing paste until the sand scratches have been removed and the lens is clear.
Polish and Protect
Remove the masking tape and wipe the headlight lens using attached cleaning cloth. Using UV Protective Paste (STEP 3) to polish and prevent UV damage.
Storage:
Products shall be ideally stored in a cool ,dry location in unopened containers at a temperature between 8-28 degree c ( 46 to 82F) unless otherwise labeled.