Module diode laser 7 W NUBM44-V2 450nm en cuivre avec fils et objectif en verre DTR-G-2

EUR 160,80 Achat immédiat, EUR 15,53 Livraison, 30-Jour Retours, Garantie client eBay
Vendeur: dtr-lpf ✉️ (7.978) 100%, Lieu où se trouve: Saint Louis, Missouri, US, Lieu de livraison: WORLDWIDE, Numéro de l'objet: 171841770497 Module diode laser 7 W NUBM44-V2 450nm en cuivre avec fils et objectif en verre DTR-G-2. Listing is for a single 7W NUBM44-V2(NUBM44-81/NUBM47-A1) 450nm laser diode  mounted in a 12mm x 30mm copper module with thermal back half, leads and a DTR-G-2 glass lens.  UPDATE the NUBM44-V1 diode out of the NUBM44-71/NUBM47T blocks have been out of production for about a year now. It is now clear that the NUBM44-V2 diodes in the NUBM44-81/NUBM47-A1 blocks from currently in production projectors have an updated higher efficiency  version of the diode.  This change is mirrors when the A140 445nm diodes were testing with a large i ncrease  in power that had not been seen previously  leading to identifying the changeover and the more efficient version being called  the M140 445nm diode. The V2 diode has identical beam properties as the V1 but have on average a 10% increase in efficiency The V2 will do well over 7W with 4.5A using a DTR-G-2 glass lens with some pushing over 8W. 44 vs 47 is 8 diode block vs 10 diode block. There is some confusion that the power difference is 44 vs 47 which is not correct.  It is:  6W NUBM44-71/NUBM47T vs  7W  NUBM44-81/NUBM47-A1. !!if you have purchased a NUBM44 from me in the last six months You have received a NUBM44-V2 and a mixed chance for it being either a V1 or V2 version going several months back of that mid 2017.!! Save yourself the headache of pressing and soldering. Just add heatsink and driver limiting the current to 4.5A or less.  Diodes are current hungry and as they heat up their internal resistance is  lowered causing them to want to draw more current. Don't attempt to  connect the diode directly to a fixed voltage source like a battery or wall adapter. A laser driver limited to no more than 4.5A is needed to power this diode. If you run off a alternative power source like a bench power supply you are accepting the risk of doing so. Non Laser driver power sources can cause reduced life or even immediate damage.

Suggested Drivers I carry

SXD Super X-Drive Laser Driver

ACS4500BU Laser Driver Blackbuck 8M Laser Driver
Here is what you get. One  NUBM44-V2 450nm  diode   mounted in a 12mm x 30mm copper module with leads and a DTR-G-2 glass lens . If  your goal is to use in CNC Engraving check out this post and video.   CNC Laser Engraving 8bit Shades of Grey 445nm

  

6W+ NUBM44 450nm Laser Diode








































*Disclamer* By purchasing these diodes you are agreeing to the following. - You are over 18 years of age .  - You understand that these components that are mentioned above are dangerous when not properly assembled into a finished product.  - You will use these as components and properly incorporate them into a finished product.  - You will use these diodes/modules in a safe and responsible manner and for a legal purpose.  - You are legally responsible for the use of these components, improper use of these components or their end products.  - You are legally responsible for any injury to anybody resulting from the use of or assembly of these components or their finished products.  - You Accept this diode/module as a COMPONENT for integration in a system of YOUR OWN design and will be legally responsible from any and all LIABILITIES These Diodes and Modules are sold solely as a component for incorporation into the customer's end products. Therefore, this diode/module is exempt from compliance with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete products.
  • Condition: Neuf
  • Model: NUBM44-V2
  • MPN: NUBM44-V2
  • Brand: DTR's Laser Shop
  • Country/Region of Manufacture: United States

PicClick Insights - Module diode laser 7 W NUBM44-V2 450nm en cuivre avec fils et objectif en verre DTR-G-2 PicClick Exclusif

  •  Popularité - 374 personnes suivent la vente, 0.1 de nouvelles personnes suivent la vente par jour, 3.195 days for sale on eBay. Super grande quantité suivi. 445 vendu, 3 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 7.978+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif