220V Stainless Steel 300W 100MM Solder Soldering Pot Desoldering Bath Casting.

EUR 47,45 Achat immédiat ou Offre directe, Livraison gratuite, 30-Jour Retours, Garantie client eBay
Vendeur: loppen1 ✉️ (1.907) 96.4%, Lieu où se trouve: SH, CN, Lieu de livraison: WORLDWIDE, Numéro de l'objet: 134914527711 220V Stainless Steel 300W 100MM Solder Soldering Pot Desoldering Bath Casting.. AC 220V 300W 100MM Electric Solder Pot Tin Melting Furnace Casting Pouring Crucible
    • Condition: 100% new
    • Color: Blue & Gold & Yellow & Red & Black
    • Material: Stainless Steel
    • Total Size: approx.21x13.8x7cm(8.27x5.43x2.76inch)(LxWxH)
    • Tin Pan Inner Diameter: approx.10cm(3.94inch)
    • Capacity: 1200g
    • Molten Solder Time: About 8 minutes
    • Input Voltage: AC220V 50Hz
    • Power: 300W
    • Suitable for: Melting solder
    • Item included: 1 x Solder Furnace(Included Adapter)

      This Is Aftermarket Replacement Item But Not Genuine

    • Note:

      1) All dimensions are measured by hand, there may be small deviations.

      2) Color may vary slightly due to the color setting of each individual monitor.

      3) This product must be grounded. Improper installation of the grounding must be prohibited.

      4) Position the control dial to high range when you start to use the solder pot, and then place the dial to the grade of auto-temperature after soldering. The general working temperature of molten solder in the solder pot is 300-350 degree(around grade 4-grade 9). The temperature of melted solder shouldn't be too high, or it will cause the aging of solder pot, the darkening or yellowing of melted solder. When highly acidic scaling powder is applied, the solder pot is more likely to be corroded or perforated under extraordinarily high temperature.

      5) Power must be turned off before leaving to avoid accidents.

Product Dimension:

Feature:

1) Using high quality stainless steel solder pot, with a high temperature, acid, abrasion resistance, non-stick tin, tin oxide surface less so.

2) Temperature can be adjusted according to requirements

3) Easy to use, good thermal effects, tin melting fast

4) Less power consumption, energy saving, long life

5) New electronic thermostat circuit design, the working temperature from 200-480.

6) Initial use tin stove, electric core of a small amount of smoke is normal


Le 31 janv. 2024 à 15:51:24 CET, le vendeur a ajouté les informations suivantes :

  • Condition: Neuf
  • On promet: L'article réel est conforme à l'image
  • Couleur: Blue & Gold & Yellow & Red & Black
  • Matériel: Stainless Steel
  • Taille: Total:21x13.8x7cm(8.27x5.43x2.76inch)(LxWxH)
  • Diamètre: Tin Pan Inner: approx.10cm(3.94inch)
  • Capacité: 1200g
  • Temps: Molten Solder: About 8 minutes
  • Tension: Input: AC220V 50Hz
  • Puissance: 300W
  • Pour: for Melting solder
  • Remarque: This product must be grounded
  • Caractéristiques: The working temperature from 200-480
  • Regulatory complian: FR229294_01IKID
  • Numéro de pièce fabricant: sans objet
  • Marque: Sans marque/Générique
  • Type: regular

PicClick Insights - 220V Stainless Steel 300W 100MM Solder Soldering Pot Desoldering Bath Casting. PicClick Exclusif

  •  Popularité - 0 personnes suivent la vente, 0.0 de nouvelles personnes suivent la vente par jour, 58 days for sale on eBay. 0 vendu, 10 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 1.907+ articles vendu. 3.6% évaluations négative. Bon vendeur avec bonne rétroaction positive et bonne quantité de cotes.

Les Gens ont Aussi Aimé PicClick Exclusif