Fil mémoire de forme 10 m NiTiNol (alliage mémoire de forme - SMA) matériau intelligent Différents diamètres et températures de conversion

EUR 14,90 Achat immédiat, EUR 2,19 Livraison, Garantie client eBay
Vendeur: nitinolxy ✉️ (777) 100%, Lieu où se trouve: Leipzig, DE, Lieu de livraison: WORLDWIDE, Numéro de l'objet: 272744208099 Fil mémoire de forme 10 m NiTiNol (alliage mémoire de forme - SMA) matériau intelligent. Sie erwerben 10 m Draht aus der Formgedächtnislegierung NiTiNol. Das Material hat die äußerst interessante Eigenschaft, im kalten Zustand (bis ca. 45°C) plastisch verformbar zu sein und sich im heißen Zustand (ab ca. 55°C - sogenannte Af- oder Umwandlungstemperatur) an seine alte Form „erinnern“ zu können. Es handelt sich um sogenanntes pseudoplastisches Verhalten. Aufgrund dieser Eigenschaft wird das Material Formgedächtnislegierung (FGL) oder englisch Shape Memory Alloy (SMA) genannt. Durch die Legierung mit Kupfer (NiTiCu) weist der Draht, im Verhältnis zu binärem Nickel-Titan, eine sehr schmale Hysterese auf.

Die eingeprägte Form des angebotenen Drahtes ist „gerade“. Bei Raumtemperatur ist er plastisch gut verformbar, wie auf der zweiten Abbildung zu sehen ist. In diesem Zustand lässt er sich auch relativ leicht in die Länge ziehen. Die Dehnung kann dabei bis zu 8% betragen, ohne dass der Draht Schaden nimmt. Wird er über die Umwandlungstemperatur erwärmt (beispielsweise im heißen Wasser oder durch elektrischen Strom), nimmt er die eingeprägt Form wieder an (siehe erste und dritte Abbildung) und entwickelt dabei beachtliche Kräfte. Er ist in der Lage, bei einer Erwärmung auf ca. 90°C ein Gewicht von 

Durchmesser 1,0 mm: ...25 kg senkrecht anzuheben. Das entspricht einer Kraft von 250 N.

Durchmesser 0,7 mm: ...15 kg senkrecht anzuheben. Das entspricht einer Kraft von 250 N.

Durchmesser 0,5 mm: ...6,5 kg senkrecht anzuheben. Das entspricht einer Kraft von 65 N.

Durchmesser 0,25 mm: ...1,6 kg senkrecht anzuheben. Das entspricht einer Kraft von 16 N.

Durchmesser 0,1 mm: ...0,3 kg senkrecht anzuheben. Das entspricht einer Kraft von 3 N.

Durch diese Eigenschaften ist der Draht bestens als Aktor für beispielsweise Robotikanwendungen geeignet, wird aber auch gern im Modellbau verwendet. Seine spezifische (gewichtsbezogene) Leistungsfähigkeit übertrifft jene von Elektromotoren deutlich. Die Erwärmung erfolgt dabei durch elektrischen Strom. Es gibt auch viele interessante Ideen, das Material als Wärmekraftmaschine (bspw. Heatmobile) oder als kompletten Regelkreis (Sensor, Regler, Aktor) in thermisch schaltenden Ventilen zu verwenden. In der Medizintechnik findet es beispielsweise Anwendung in gefäßstabilisierenden Stents.

NEU: Eine Legierung (NiTiCu) mit einer Umwandlungstemperatur (Af) von 5°C und 20°C ist mit den Durchmessern 0,25mm und 0,5mm ebenfalls erhältlich. Bei Raumtemperatur weist diese im spannungsfreien Zustand superelastisches Verhalten auf.

Ebenfalls NEU: NiTi mit einer Umwandlungstemperatur von -10°C...dieses Material ist auch unter dem Markennamen Flexitan bekannt.

Der Versand kann über einen Brief (kostenfrei) geschehen oder unter Mehrkosten auch über ein versichertes Päckchen (5,99€) oder ein Einschreiben (3,49€). Beim Kauf von mehreren Einheiten erfolgt der Versand natürlich zusammen und die entsprechenden Kosten fallen nur einmal an.

Gern liefern wir den Draht auf einer Spule (außer Durchmesser 2,0 mm). Wählen Sie dafür bitte die Versandoption "DHL Paket"!

Sie benötigen andere Abmessungen und Umwandlungstemperaturen oder größere Mengen? Sprechen Sie uns an!

__________________________________________________________________________________

You acquire 10 m wire made of the shape memory alloy NiTiNol. The material has the very interesting property of being plastically deformable in the cold state (up to approx. 45 ° C) and being able to "remember" its old shape in the hot state (from approx. 55 ° C). It is so-called pseudoplastic behavior. Because of this property, the material is called shape memory alloy (SMA) or German Formgedächtnislegierung (FGL). Due to the alloying with copper (NiTiCu), the wire has a very narrow hysteresis compared to binary nickel-titanium.

The impressed shape of the offered wire is "straight". At room temperature, it is plastically readily deformable, as can be seen in the second figure. In this state, it can also be lengthened relatively easily. The elongation can be up to 8% without the wire being damaged. If it is heated above the transformation temperature (for example, in hot water or by electrical current), it assumes the impressed form again (see first and third figures) and develops considerable forces. It is able to lift a weight of Diameter 1.0 mm: ... 25 kg vertically. This corresponds to a force of 250 N.

Diameter 0.7 mm: ... 15 kg vertically.  This corresponds to a force of 250 N.

Diameter 0.5 mm: ... 6.5 kg vertically. This corresponds to a force of 65 N.

Diameter 0.25 mm: ... 1.6 kg vertically. This corresponds to a force of 16 N.

Diameter 0.1 mm: ... 0.3 kg vertically. This corresponds to a force of 3 N.

when the wire is heated up to approx. 90°C.

Due to these properties, the wire is ideally suited as an actuator for, for example, robot applications, but is also used in modeling. The heating is effected by electric current in most cases. Its specific (weight-related) performance significantly exceeds that of electric motors.  There are also many interesting ideas to use the material as a heat engine (eg heatmobile) or as a complete control circuit (sensor, regulator, actuator) in thermally switching valves. In medical technology, for example, it is used in vascular stabilizing stents.

NEW: Also available is an alloy with a phase change temperature (Af) of 5°C and 20°C and diameters of 0.25mm and 0.5mm. Under environmental conditions it shows superelastic behavior if no force is applied.

Also NEW: NiTi with a phase change temperature of -10°C...this material is also known as FLEXITAN.

The shipping can be effected via a letter (shipping costs  outside Germany 2.19 €) or under additional costs also via an insured parcel (outside Germany 9,99 €). If you buy more than one wire section, the shipment will of course be combined and the corresponding costs will only be charged once.

We are happy to deliver the wire on a spool (except diameter 2.0 mm). Please choose the shipping option "DHL Paket"!

Do you need other dimensions and transformation temperatures or larger quantities? Contact us!

  • Condition: Neuf
  • Durchmesser: 0,1 mm
  • Umwandlungstemperatur (PCT): 60°C (+-5)
  • Ausländisches Produkt: Nein
  • Marke: Markenlos
  • Modifizierter Artikel: Nein
  • Angebotspaket: Nein
  • Maßeinheit: m

PicClick Insights - Fil mémoire de forme 10 m NiTiNol (alliage mémoire de forme - SMA) matériau intelligent PicClick Exclusif

  •  Popularité - 149 personnes suivent la vente, 0.1 de nouvelles personnes suivent la vente par jour, 2.451 days for sale on eBay. Super grande quantité suivi. 70 vendu, 10 disponibles.
  •  Meilleur Prix -
  •  Vendeur - 777+ articles vendu. 0% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif